Enigma Code is a sophisticated and beautiful woven wilton carpet which will be a fantastic addition to any room. Whether fitted wall to wall or done as a bound edge rug, this carpet is soft and welcoming while being easy to maintain. The pile fibre is 100% pure new wool blended from both European and New Zealand wool to give it softness and resilience. Available in a choice of six colours, with the ability to have it woven in any bespoke colour for a minimum of 80 square metres. For more information contact us anytime.
Enigma Code is available in six standard colours which offer a contemporary selection of neutral tones which will match to any interior. The collection also includes a wonderful charcoal colour which is a very popular choice for residential common parts as it hides soiling well. We also have the ability to create unique bespoke colours for a minimum 80 square metres. We will be recolouring the standard colour collection in 2016.
Enigma Code comes in a four metre width ideal for many rooms, however if you room is wider than four metres, the carpet seams beautifully to ensure near invisible seams. We recommend that Enigma Infinity is installed either stretched over gripper with a felt underlay or double stick using the durafit system http://www.interfloor.com/brands/duralay/ in commercial environments. Wool Classics offer a full installation service if you prefer a one stop shop. We also are happy to advise your installers on the installation of any of our products.
The Carpet is a 100% wool pile and woven on a wilton loom so ideal for both residential and commercial uses. The product performs well in all domestic environments and has a full fire certificate for both residential and commercial use. Enigma Code is not suitable for wet areas.
|Pile fibre||100% Wool|
The residential suitability guide provides information as to the suggested use of our product in specific locations of the home. The selection of a carpet and its suitability for the intended location and wear patterns should be discussed with the carpet installer prior to ordering.
We do not recommend the installation of any of our carpets in areas of high moisture, such as kitchens or bathrooms.
A number of our standard products can be installed in commercial locations. Please contact the sales office for more information (firstname.lastname@example.org or call Tel: +44 (0) 207 349 1560).
Fitting is a critical process. Wool Classics recommends that only the most competent fitters should be considered to plan and install their carpets. All installation, including sub-floor preparation, must be in accordance with the recommendations of BS5325/2001: The Installation of Textile Floorcoverings - Code of Practice. Please contact a member of our installation team should you require specific advice (Tel: +44 (0) 207 349 1560).
TOG Ratings are the result of tests carried out in accordance with BS4745/2005 and solely relate to the carpet (excluding underlay). Where the carpet is being installed over a sub-floor containing underfloor heating, specific calculations as to the thermal resistance of the carpet and underlay must be undertaken by the heating engineers to ensure the heating system will function efficiently in conjunction with the carpet and underlay.
All information and technical advice, whether verbal, written or by way of trial samples is for guidance only and submitted in good faith, but without warranty or guarantee, since the skill of the installation operatives, methods of installation used, site conditions, suitability of sub-floor and local factors specific to the scheme are beyond the control of Wool Classics. Wool Classics will not be liable for loss, damage or injury arising out of any action taken on this advice.
The actual colour of carpets may vary from those shown.
All our carpets can be supplied as either bordered rugs or stair runners (where suitable for this application), edged in either Linen, Leather or blind hemmed (giving a concealed edge) in cotton tape.
The minimum order is for 1.00 linear metre of the chosen carpet width. Orders will be rounded up to the nearest 5cm and charged accordingly (subject to standard tolerances of +/- 1.25% on the ordered length).
All orders should be placed using metric dimensions and will be acknowledged accordingly. Where orders are placed using Imperial sizes, we are unable to accept any liability for inaccuracies in the conversion used; please check your order acknowledgment carefully and advise any discrepancies.
Placement of an order implies that you have read and agree to our terms and conditions of sale.